diff --git a/flake.nix b/flake.nix
index 7bc4c49..af4dc16 100755
--- a/flake.nix
+++ b/flake.nix
@@ -37,20 +37,6 @@
           ./system/susans-hp/configuration.nix
         ];
       };
-      vincents-vm = lib.nixosSystem {
-        inherit system;
-        specialArgs = { inherit unstable; };
-        modules = [
-          ./system/vincents-vm/configuration.nix
-        ];
-      };
-      susans-vm = lib.nixosSystem {
-        inherit system;
-        specialArgs = { inherit unstable; };
-        modules = [
-          ./system/susans-vm/configuration.nix
-        ];
-      };
     };
   };
 }
diff --git a/setup.sh b/setup.sh
index f9b5202..2d6b9bd 100755
--- a/setup.sh
+++ b/setup.sh
@@ -1,5 +1,7 @@
-sudo nix --experimental-features "nix-command flakes" run github:nix-community/disko/latest -- --mode disko system/vincents-old-hp/disk.nix
+read HOST
 
-sudo nixos-install --flake .#vincents-old-hp
+sudo nix --experimental-features "nix-command flakes" run github:nix-community/disko/latest -- --mode disko system/$HOST/disk.nix
+
+sudo nixos-install --flake .#$HOST
 
 echo "REBOOT YOUR COMPUTER"
diff --git a/system/susans-vm/configuration.nix b/system/susans-vm/configuration.nix
deleted file mode 100755
index 3589937..0000000
--- a/system/susans-vm/configuration.nix
+++ /dev/null
@@ -1,273 +0,0 @@
-# Edit this configuration file to define what should be installed on
-# your system.  Help is available in the configuration.nix(5) man page
-# and in the NixOS manual (accessible by running ‘nixos-help’).
-
-{ config, pkgs, unstable, lib, ... }:
-
-#let
-  #unstableTarball =
-  #  fetchTarball
-  #    https://github.com/NixOS/nixpkgs/archive/nixos-unstable.tar.gz;
-#in
-
-
-{
-  imports =
-    [ # Include the results of the hardware scan.
-      ./hardware-configuration.nix
-    ];
-
-  # legacy boot
-  #boot.loader.grub.enable = true;
-  #boot.loader.grub.device = "/dev/vda";
-  #boot.loader.grub.useOSProber = true;
-
-  # UEFI boot
-  boot.loader.systemd-boot.enable = true;
-  boot.loader.efi.canTouchEfiVariables = true;
-  #boot.loader.efi.efiSysMountPoint = "/boot/efi";
-
-  boot.binfmt.registrations.appimage = {
-    interpreter = "${pkgs.appimage-run}/bin/appimage-run";
-    recognitionType = "magic";
-    offset = 0;
-    mask = ''\xff\xff\xff\xff\x00\x00\x00\x00\xff\xff\xff'';
-    magicOrExtension = ''\x7fELF....AI\x02'';
-  };
-
-  # boot logo
-  boot.plymouth.enable = true;
-
-  # ZRAM
-  zramSwap.enable = true;
-  zramSwap.memoryPercent = 50;
-  boot.kernel.sysctl = {
-    "vm.swappiness" = 10;
-    "vm.vsf_cache_pressure" = 50;
-  };
-
-  boot.binfmt.emulatedSystems = [ "aarch64-linux" ];
-
-  #boot.kernelPackages = pkgs.linuxPackages_xanmod_stable;
-  boot.extraModulePackages = with config.boot.kernelPackages; [ v4l2loopback ];
-
-  networking.hostName = "susans-vm"; # Define your hostname.
-  networking.networkmanager.enable = true;
-
-  # Set your time zone.
-  time.timeZone = "America/New_York";
-
-  # Select internationalisation properties.
-  i18n.defaultLocale = "en_US.UTF-8";
-  console = {
-    font = "Lat2-Terminus16";
-    useXkbConfig = true;
-  };
-  fonts.packages = [ pkgs.corefonts ];
-
-  # Enable the X11 windowing system.
-  services.xserver.enable = true;
-
-  # displaylink
-  #services.xserver.videoDrivers = [ "displaylink" "modesetting" ];
-
-  # waydroid
-  virtualisation.waydroid.enable = true;
-
-  # Enable the Cinnamon Desktop Environment.
-  services.displayManager.sddm.enable = true;
-  services.xserver.desktopManager.plasma5.enable = true;
-  programs.kdeconnect.enable = true;
-
-  # Configure keymap in X11
-  services.xserver = {
-    xkb.layout = "us";
-    #xkb.variant = "colemak";
-    #xkb.model = "chromebook";
-  };
-  services.xserver.xkb.options = "grp:win_space_toggle";
-
-  # Enable CUPS to print documents.
-  services.printing.enable = true;
-  services.avahi.enable = true;
-  services.avahi.nssmdns4 = true;
-  services.avahi.openFirewall = true;
-  services.printing.drivers = [ pkgs.hplip ];
-
-  # Enable sound with pipewire.
-  #sound.enable = true;
-  hardware.pulseaudio.enable = false;
-  security.rtkit.enable = true;
-  services.pipewire = {
-    enable = true;
-    alsa.enable = true;
-    alsa.support32Bit = true;
-    pulse.enable = true;
-    # If you want to use JACK applications, uncomment this
-    jack.enable = true;
-
-    # use the example session manager (no others are packaged yet so this is en>
-    # no need to redefine it in your config for now)
-    wireplumber.enable = true;
-  };
-  programs.noisetorch.enable = true;
-
-  # Enable touchpad support (enabled default in most desktopManager).
-  services.libinput.enable = true;
-
-  # Define a user account. Don't forget to set a password with ‘passwd’.
-  users.users.susan = {
-    isNormalUser = true;
-    shell = pkgs.fish;
-    initialHashedPassword = "$y$j9T$0PPbSXGEwyGq6ZFvJMhmE/$D5ZlKOwR/4NCDD8eaxWiQiG1TTRSK4PfbQe/Tm60Id/";
-    extraGroups = [ "wheel" "networkmanager" "lp" "audio" "video" "cdrom" "input" ];
-  };
-  programs.fish.enable = true;
-
-  nix.extraOptions = ''experimental-features = nix-command flakes'';
-
-  nixpkgs.config.permittedInsecurePackages = [
-    "electron-12.2.3"
-    "electron-27.3.11"
-  ];
-
-  nixpkgs.config.allowUnfree = true;
-
-  # List packages installed in system profile. To search, run:
-  # $ nix search wget
-  environment = {
-    systemPackages = with pkgs; [
-      tailscale
-      bleachbit
-      btop
-      neofetch
-      clamtk
-      trayscale
-      topgrade
-      appimage-run
-      unstable.gearlever
-      # kde apps
-      libsForQt5.discover
-      libsForQt5.sddm-kcm
-      libsForQt5.ark
-      libsForQt5.qtmultimedia
-      # editors
-      libsForQt5.kate
-      nano
-      # office apps
-      libreoffice-qt
-      zoom-us
-      # package manager
-      wget
-      # web browser
-      firefox
-    ];
-  };
-
-  # flatpak
-  xdg.portal.enable = true;
-  services.flatpak.enable = true;
-  systemd.services.configure-flathub-repo = {
-    wantedBy = ["multi-user.target"];
-    path = [ pkgs.flatpak ];
-    script = ''
-      flatpak remote-add --if-not-exists flathub https://flathub.org/repo/flathub.flatpakrepo
-    '';
-  };
-
-  # bluetooth
-  hardware.bluetooth.enable = true;
-
-  # dconf
-  programs.dconf.enable = true;
-
-  # enable the tailscale service
-  services.tailscale.enable = true;
-
-  # Some programs need SUID wrappers, can be configured further or are
-  # started in user sessions.
-  programs.mtr.enable = true;
-  programs.gnupg.agent = {
-    enable = true;
-    enableSSHSupport = true;
-  };
-
-  # List services that you want to enable:
-
-  # preload
-  services.preload.enable = true;
-
-  # schedualer
-  services.system76-scheduler.enable = true;
-
-  # Enable the OpenSSH daemon.
-  services.openssh.enable = false;
-
-  # auto clean
-  nix.optimise.automatic = true;
-  nix.gc.automatic = true;
-  nix.gc.dates = "weekly";
-
-  # enable fwupd
-  services.fwupd.enable = true;
-
-  # captive browser
-  programs.captive-browser.enable = true;
-  programs.captive-browser.bindInterface = false;
-
-
-  # auto update
-  system.autoUpgrade.enable = true;
-  system.autoUpgrade.allowReboot = true;
-  system.autoUpgrade.rebootWindow = {
-    lower = "01:00";
-    upper = "05:00";
-  };
-
-  #clamav
-  services.clamav.updater.enable = true;
-  services.clamav.daemon.enable = true;
-
-
-  # audit
-   security.auditd.enable = true;
-   security.audit.enable = true;
-   security.audit.rules = [
-     "-a exit,always -F arch=b64 -S execve"
-   ];
-
-
-  # Open ports in the firewall.
-  networking.firewall.allowedTCPPorts = [
-     22
-  ];
-  networking.firewall.allowedUDPPorts = [
-    22
-  ];
-  networking.firewall.allowedTCPPortRanges = [
-     {
-       from = 1714;
-       to = 1764;
-     }
-  ];
-  networking.firewall.allowedUDPPortRanges = [
-     {
-       from = 1714;
-       to = 1764;
-     }
-  ];
-  networking.firewall.rejectPackets = true;
-  # networking.firewall.allowedUDPPorts = [ 21116 ];
-  # Or disable the firewall altogether.
-  networking.firewall.trustedInterfaces = [ "tailscale0" ];
-
-  services.fail2ban.enable = true;
-  networking.firewall.enable = true;
-
-  # This value determines the NixOS release from which the default settings for stateful data, like file locations and database versions on your system were
-  # taken. It‘s perfectly fine and recommended to leave this value at the release version of the first install of this system. Before changing this value read
-  # the documentation for this option (e.g. man configuration.nix or on https://nixos.org/nixos/options.html).
-  system.stateVersion = "24.05"; # Did you read the comment?
-
-}
-
diff --git a/system/susans-vm/disk.nix b/system/susans-vm/disk.nix
deleted file mode 100755
index 87e7c2f..0000000
--- a/system/susans-vm/disk.nix
+++ /dev/null
@@ -1,74 +0,0 @@
-#{ config, pkgs, disko, ... }:
-{
-  disko.devices = {
-    disk = {
-      vda = {
-        type = "disk";
-        device = "/dev/vda";
-        content = {
-          type = "gpt";
-          partitions = {
-            ESP = {
-              label = "boot";
-              name = "ESP";
-              size = "512M";
-              type = "EF00";
-              content = {
-                type = "filesystem";
-                format = "vfat";
-                mountpoint = "/boot";
-                mountOptions = [
-                  "defaults"
-                ];
-              };
-            };
-            luks = {
-              size = "100%";
-              label = "luks";
-              content = {
-                type = "luks";
-                name = "cryptroot";
-                extraOpenArgs = [
-                  "--allow-discards"
-                  "--perf-no_read_workqueue"
-                  "--perf-no_write_workqueue"
-                ];
-                # https://0pointer.net/blog/unlocking-luks2-volumes-with-tpm2-fido2-pkcs11-security-hardware-on-systemd-248.html
-                settings = {crypttabExtraOpts = ["fido2-device=auto" "token-timeout=10"];};
-                content = {
-                  type = "btrfs";
-                  extraArgs = ["-L" "nixos" "-f"];
-                  subvolumes = {
-                    "/root" = {
-                      mountpoint = "/";
-                      mountOptions = ["subvol=root" "compress=zstd" "noatime"];
-                    };
-                    "/home" = {
-                      mountpoint = "/home";
-                      mountOptions = ["subvol=home" "compress=zstd" "noatime"];
-                    };
-                    "/nix" = {
-                      mountpoint = "/nix";
-                      mountOptions = ["subvol=nix" "compress=zstd" "noatime"];
-                    };
-                    "/persist" = {
-                      mountpoint = "/persist";
-                      mountOptions = ["subvol=persist" "compress=zstd" "noatime"];
-                    };
-                    "/log" = {
-                      mountpoint = "/var/log";
-                      mountOptions = ["subvol=log" "compress=zstd" "noatime"];
-                    };
-                  };
-                };
-              };
-            };
-          };
-        };
-      };
-    };
-  };
-
-  fileSystems."/persist".neededForBoot = true;
-  fileSystems."/var/log".neededForBoot = true;
-}
diff --git a/system/susans-vm/hardware-configuration.nix b/system/susans-vm/hardware-configuration.nix
deleted file mode 100644
index ec0c8a9..0000000
--- a/system/susans-vm/hardware-configuration.nix
+++ /dev/null
@@ -1,26 +0,0 @@
-# Do not modify this file!  It was generated by ‘nixos-generate-config’
-# and may be overwritten by future invocations.  Please make changes
-# to /etc/nixos/configuration.nix instead.
-{ config, lib, pkgs, modulesPath, ... }:
-
-{
-  imports =
-    [ (modulesPath + "/installer/scan/not-detected.nix")
-    ];
-
-  boot.initrd.availableKernelModules = [ "xhci_pci" "usb_storage" "sd_mod" "rtsx_pci_sdmmc" ];
-  boot.initrd.kernelModules = [ ];
-  boot.kernelModules = [ "kvm-amd" ];
-  boot.extraModulePackages = [ ];
-
-  # Enables DHCP on each ethernet and wireless interface. In case of scripted networking
-  # (the default) this is the recommended approach. When using systemd-networkd it's
-  # still possible to use this option, but it's recommended to use it in conjunction
-  # with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`.
-  networking.useDHCP = lib.mkDefault true;
-  # networking.interfaces.tailscale0.useDHCP = lib.mkDefault true;
-  # networking.interfaces.wlo1.useDHCP = lib.mkDefault true;
-
-  nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
-  hardware.cpu.amd.updateMicrocode = lib.mkDefault config.hardware.enableRedistributableFirmware;
-}
diff --git a/system/vincents-vm/configuration.nix b/system/vincents-vm/configuration.nix
deleted file mode 100755
index b576587..0000000
--- a/system/vincents-vm/configuration.nix
+++ /dev/null
@@ -1,325 +0,0 @@
-# Edit this configuration file to define what should be installed on
-# your system.  Help is available in the configuration.nix(5) man page
-# and in the NixOS manual (accessible by running ‘nixos-help’).
-
-{ config, pkgs, unstable, lib, ... }:
-
-
-{
-  imports =
-    [ # Include the results of the hardware scan.
-      ./hardware-configuration.nix
-    ];
-
-  # legacy boot
-  #boot.loader.grub.enable = true;
-  #boot.loader.grub.device = "/dev/vda";
-  #boot.loader.grub.useOSProber = true;
-
-  # UEFI boot
-  boot.loader.systemd-boot.enable = true;
-  boot.loader.efi.canTouchEfiVariables = true;
-  #boot.loader.efi.efiSysMountPoint = "/boot/efi";
-
-  boot.binfmt.registrations.appimage = {
-    interpreter = "${pkgs.appimage-run}/bin/appimage-run";
-    recognitionType = "magic";
-    offset = 0;
-    mask = ''\xff\xff\xff\xff\x00\x00\x00\x00\xff\xff\xff'';
-    magicOrExtension = ''\x7fELF....AI\x02'';
-  };
-
-  # boot logo
-  boot.plymouth.enable = true;
-
-  # ZRAM
-  zramSwap.enable = true;
-  zramSwap.memoryPercent = 50;
-  boot.kernel.sysctl = {
-    "vm.swappiness" = 10;
-    "vm.vsf_cache_pressure" = 50;
-  };
-
-  boot.binfmt.emulatedSystems = [ "aarch64-linux" ];
-
-  #boot.kernelPackages = pkgs.linuxPackages_xanmod_stable;
-  boot.extraModulePackages = with config.boot.kernelPackages; [ v4l2loopback ];
-
-  networking.hostName = "vincents-vm"; # Define your hostname.
-  networking.networkmanager.enable = true;
-
-  # Set your time zone.
-  time.timeZone = "America/New_York";
-
-  # Select internationalisation properties.
-  i18n.defaultLocale = "en_US.UTF-8";
-  console = {
-    font = "Lat2-Terminus16";
-    useXkbConfig = true;
-  };
-  fonts.packages = [ pkgs.corefonts ];
-
-  # Enable the X11 windowing system.
-  services.xserver.enable = true;
-
-  # displaylink
-  #services.xserver.videoDrivers = [ "displaylink" "modesetting" ];
-
-  # waydroid
-  #virtualisation.waydroid.enable = true;
-
-  # Enable the Cinnamon Desktop Environment.
-  services.displayManager.sddm.enable = true;
-  services.desktopManager.plasma6.enable = true;
-  programs.kdeconnect.enable = true;
-
-  # Configure keymap in X11
-  services.xserver = {
-    xkb.layout = "us";
-    #xkb.variant = "colemak";
-    #xkb.model = "chromebook";
-  };
-  services.xserver.xkb.options = "grp:win_space_toggle";
-
-  # Enable CUPS to print documents.
-  services.printing.enable = true;
-  services.avahi.enable = true;
-  services.avahi.nssmdns4 = true;
-  services.avahi.openFirewall = true;
-  services.printing.drivers = [ pkgs.hplip ];
-
-  # Enable sound with pipewire.
-  sound.enable = true;
-  hardware.pulseaudio.enable = false;
-  security.rtkit.enable = true;
-  services.pipewire = {
-    enable = true;
-    alsa.enable = true;
-    alsa.support32Bit = true;
-    pulse.enable = true;
-    # If you want to use JACK applications, uncomment this
-    jack.enable = true;
-
-    # use the example session manager (no others are packaged yet so this is en>
-    # no need to redefine it in your config for now)
-    wireplumber.enable = true;
-  };
-  programs.noisetorch.enable = true;
-
-  # Enable touchpad support (enabled default in most desktopManager).
-  services.libinput.enable = true;
-
-  # Define a user account. Don't forget to set a password with ‘passwd’.
-  users.users.vincent = {
-    isNormalUser = true;
-    shell = pkgs.fish;
-    initialHashedPassword = "$y$j9T$0PPbSXGEwyGq6ZFvJMhmE/$D5ZlKOwR/4NCDD8eaxWiQiG1TTRSK4PfbQe/Tm60Id/";
-    extraGroups = [ "wheel" "networkmanager" "lp" "audio" "video" "cdrom" "input" "libvirtd" "dialout" ];
-  };
-  programs.fish.enable = true;
-
-  nix.extraOptions = ''experimental-features = nix-command flakes'';
-
-  nixpkgs.config.permittedInsecurePackages = [
-    "electron-12.2.3"
-    "electron-27.3.11"
-  ];
-
-  nixpkgs.config.allowUnfree = true;
-
-  # List packages installed in system profile. To search, run:
-  # $ nix search wget
-  environment = {
-    systemPackages = with pkgs; [
-      tailscale
-      bleachbit
-      btop
-      neofetch
-      clamtk
-      trayscale
-      topgrade
-      appimage-run
-      unstable.gearlever
-      # kde apps
-      kdePackages.discover
-      kdePackages.sddm-kcm
-      kdePackages.kwayland
-      kdePackages.ark
-      kdePackages.qtmultimedia
-      # editors
-      kdePackages.kate
-      nano
-      # vm
-      quickemu
-      quickgui
-      # containers
-      podman
-      podman-compose
-      distrobox
-      boxbuddy
-      # office apps
-      bottles
-      libreoffice-qt
-      logseq
-      zoom-us
-      orca-slicer
-      unstable.freecad-wayland
-      gpodder
-      # package manager
-      wget
-      # web browser
-      librewolf
-      ungoogled-chromium
-    ];
-  };
-
-  services = {
-      syncthing = {
-          enable = true;
-          user = "vincent";
-          openDefaultPorts = true;
-          dataDir = "/home/vincent/logseq";    # Default folder for new synced folders
-          configDir = "/home/vincent/Documents/.config/syncthing";   # Folder for Syncthing's settings and keys
-      };
-  };
-
-  # flatpak
-  xdg.portal.enable = true;
-  services.flatpak.enable = true;
-  systemd.services.configure-flathub-repo = {
-    wantedBy = ["multi-user.target"];
-    path = [ pkgs.flatpak ];
-    script = ''
-      flatpak remote-add --if-not-exists flathub https://flathub.org/repo/flathub.flatpakrepo
-    '';
-  };
-
-  # podman
-  virtualisation.containers.enable = true;
-  virtualisation = {
-    podman = {
-      enable = true;
-
-      # Create a `docker` alias for podman, to use it as a drop-in replacement
-      dockerCompat = true;
-
-      # Required for containers under podman-compose to be able to talk to each other.
-      defaultNetwork.settings.dns_enabled = true;
-    };
-  };
-
-  # bluetooth
-  hardware.bluetooth.enable = true;
-
-  # dconf
-  programs.dconf.enable = true;
-
-  # enable the tailscale service
-  services.tailscale.enable = true;
-
-  # Some programs need SUID wrappers, can be configured further or are
-  # started in user sessions.
-  programs.mtr.enable = true;
-  programs.gnupg.agent = {
-    enable = true;
-    enableSSHSupport = true;
-  };
-
-  # List services that you want to enable:
-
-  # preload
-  services.preload.enable = true;
-
-  # schedualer
-  services.system76-scheduler.enable = true;
-
-  # Enable the OpenSSH daemon.
-  services.openssh.enable = false;
-
-  # auto clean
-  nix.optimise.automatic = true;
-
-  # enable fwupd
-  services.fwupd.enable = true;
-
-  # captive browser
-  programs.captive-browser.enable = true;
-  programs.captive-browser.bindInterface = false;
-
-
-  # auto update
-  system.autoUpgrade.enable = true;
-  system.autoUpgrade.allowReboot = true;
-  system.autoUpgrade.rebootWindow = {
-    lower = "01:00";
-    upper = "05:00";
-  };
-
-  #clamav
-  services.clamav.updater.enable = true;
-  services.clamav.daemon.enable = true;
-
-
-  # audit
-   security.auditd.enable = true;
-   security.audit.enable = true;
-   security.audit.rules = [
-     "-a exit,always -F arch=b64 -S execve"
-   ];
-
-
-  # Open ports in the firewall.
-  networking.firewall.allowedTCPPorts = [
-     22
-     8384
-     22000
-     24800
-     21116
-     7236
-     7250
-     47984
-     47989
-     47990
-     48010
-  ];
-  networking.firewall.allowedUDPPorts = [
-    22000
-    21027
-    24800
-    5353
-    5900
-    3689
-    5353
-    7236
-    47998
-    47999
-    48000
-    48002
-  ];
-  networking.firewall.allowedTCPPortRanges = [
-     {
-       from = 1714;
-       to = 1764;
-     }
-  ];
-  networking.firewall.allowedUDPPortRanges = [
-     {
-       from = 1714;
-       to = 1764;
-     }
-  ];
-  networking.firewall.rejectPackets = true;
-  # networking.firewall.allowedUDPPorts = [ 21116 ];
-  # Or disable the firewall altogether.
-  networking.firewall.trustedInterfaces = [ "tailscale0" ];
-
-  services.fail2ban.enable = true;
-  networking.firewall.enable = true;
-
-  # This value determines the NixOS release from which the default settings for stateful data, like file locations and database versions on your system were
-  # taken. It‘s perfectly fine and recommended to leave this value at the release version of the first install of this system. Before changing this value read
-  # the documentation for this option (e.g. man configuration.nix or on https://nixos.org/nixos/options.html).
-  system.stateVersion = "24.05"; # Did you read the comment?
-
-}
-
diff --git a/system/vincents-vm/hardware-configuration.nix b/system/vincents-vm/hardware-configuration.nix
deleted file mode 100644
index c7ee088..0000000
--- a/system/vincents-vm/hardware-configuration.nix
+++ /dev/null
@@ -1,38 +0,0 @@
-# Do not modify this file!  It was generated by ‘nixos-generate-config’
-# and may be overwritten by future invocations.  Please make changes
-# to /etc/nixos/configuration.nix instead.
-{ config, lib, pkgs, modulesPath, ... }:
-
-{
-  imports =
-    [ (modulesPath + "/installer/scan/not-detected.nix")
-    ];
-
-  boot.initrd.availableKernelModules = [ "nvme" "xhci_pci" "usb_storage" "sd_mod" "rtsx_pci_sdmmc" ];
-  boot.initrd.kernelModules = [ ];
-  boot.kernelModules = [ "kvm-amd" ];
-  boot.extraModulePackages = [ ];
-
-  fileSystems."/" =
-    { device = "/dev/vda2";
-      fsType = "ext4";
-    };
-
-  fileSystems."/boot" =
-    { device = "/dev/vda1";
-      fsType = "vfat";
-      options = [ "fmask=0022" "dmask=0022" ];
-    };
-
-  swapDevices = [ ];
-
-  # Enables DHCP on each ethernet and wireless interface. In case of scripted networking
-  # (the default) this is the recommended approach. When using systemd-networkd it's
-  # still possible to use this option, but it's recommended to use it in conjunction
-  # with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`.
-  networking.useDHCP = lib.mkDefault true;
-  # networking.interfaces.wlo1.useDHCP = lib.mkDefault true;
-
-  nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
-  hardware.cpu.amd.updateMicrocode = lib.mkDefault config.hardware.enableRedistributableFirmware;
-}